ISCAR MM TRD16-M60-15P-3T06 IC528 Insert

Deskripsi

ISCAR MM TRD16-M60-15P-3T06 IC528 Insert

Grade : IC528

ISCAR MM TRD16-M60-15P-3T06 IC528 Insert. A thin PVD coated TiCN layer on a tough substrate, for milling, parting and grooving on stainless and alloy steels at low to medium cutting speeds and for unstable machining conditions.

ISO Range – P/M/K	(P25-P45)(M30-M40)
ISO Range – H/S/N	(S15-S30)

Grade or Coating Type	PVD
Coating Layers	TiCN+TiN

Cutting Speed for:

MM TRD16-M60-15P-3T06 IC528 – 6403886

ISO	Material	Material Description	Material Condition	Cutting Speed Recommendations
P	1	Non-alloy steel and cast steel, free cutting steel <0.25%C	Annealed :125	100-250 m/min
P	2	Non-alloy steel and cast steel, free cutting steel >=0.25%C	Annealed :190	80-210 m/min
P	3	Non-alloy steel and cast steel, free cutting steel <0.55%C	Quench and tempered. :250	65-170 m/min
P	4	Non-alloy steel and cast steel, free cutting steel >=0.55%C	Annealed :220	110-180 m/min
P	5	Non-alloy steel and cast steel, free cutting steel >=0.55%C	Quenched & tempered. :300	95-160 m/min
P	6	Low alloy & cast steel (less than 5% of alloying elements)	Annealed :200	90-160 m/min
P	7	Low alloy & cast steel (less than 5% of alloying elements)	Quenched & tempered :275	65-200 m/min
P	8	Low alloy & cast steel (less than 5% of alloying elements)	Quenched & tempered :300	70-210 m/min
P	9	Low alloy & cast steel (less than 5% of alloying elements)	Quenched & tempered :350	95-160 m/min
P	10	High alloyed steel, cast steel and tool steel	Annealed :200	130-170 m/min
P	11	High alloyed steel, cast steel and tool steel	Quenched & tempered :325	75-100 m/min
P	12	Stainless steel and cast steel	Ferritic/martensitic :200	110-170 m/min
P	13	Stainless steel and cast steel	Martensitic :240	70-155 m/min
M	14	Stainless steel and cast steel	Austenitic :180	85-100 m/min
K	15	Grey cast iron (GG)	Pearlitic/ferritic :180	120-160 m/min
K	16	Grey cast iron (GG)	Pearlitic/martensiti :260	75-160 m/min
K	17	Nodular cast iron (GGG)	Ferritic :160	70-150 m/min
K	18	Nodular cast iron (GGG)	Pearlitic :250	110-140 m/min
K	19	Malleable cast iron	Ferritic :130	120-160 m/min
K	20	Malleable cast iron	Pearlitic :230	110-140 m/min
N	21	Aluminum-wrought alloy	Not cureable : 60	160-300 m/min
N	29	Non metallic	Duro& fiber plastics : 60	100-400 m/min
S	33	High temp. alloys. Ni or Co based	Annealed :250	20-80 m/min
S	34	High temp. alloys. Ni or Co based	Cured :350	20-80 m/min
S	37	Titanium Ti alloys	Alpha+beta alloys cu :310	20-80 m/min
H	38	Hardened steel	Hardened :560	55-65 m/min
H	39	Hardened steel	Hardened :654	45-55 m/min
H	40	Chilled cast iron	Cast :400	90-105 m/min
H	41	Cast iron	Hardened :560	55-65 m/min